Welding glove aluminium
>> Uses (*)
Thanks to its design, this type of glove is generally used for
heavy jobs that do not require fine dexterity and some welding
works (type A).
Thanks to the thick split fire retardant leather, with an average
thickness of 1.10 mm, and the insulating lining, it is commonly
used for manual welding, in the steel industry for molding parts,
working near furnaces, etc
- Questions? Tel. +46-31-14 29 70
- info@klingstrand.se
Description
Article no.: P3941
>> Technical features
Construction : cut-and-sewn. Gunn cutt pattern.
Wing thumb.With sewn cuff.
Material : Orange split palm and front cuff with fire-retardant
treatment. Back of the glove and fingers in natural split
without treatment and fully covered with an aluminized
fabric. Sewn with para-aramid yarn. The glove is fully
lined with a soft brushed cotton fabric for a good insulation
against heat. Cuff area is lined with a cotton woven fabric.
Color : orange/silver.
Sizes : 9, 10.
Packing : - carton of 50 pairs.
- polybag of 10 pairs.
>> Main advantages
Manufacture according to ISO 9001 & ISO 14001.
Robustness and comfort of leather. Protection of the forearm.
Quality of the selected materials and of the workmanship.
Flame retardant split for better heat resistance.Aluminized back to reflect heat.
Fully lined for good heat insulation.
Stitched with para-aramid thread
>> Conformity
This glove has been tested according to the following European standards:
- EN 388: 2016. Protective gloves against mechanicals risks.
- EN 407: 2004. Protective gloves against thermal risks (heat and/or fire).
- EN 12477: 2001 +A1: 2005. (Type A). Protective gloves for welders.
It complies with the European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE)
(Intermediate design, Cat II).
EU type examination certificate (module B) issued by AITEX (Spain), notified body n° 0161.